FEATURES:

• Proprietary injection molded mented ABS and fiberglass basket

• 1" (25mm) copper voice coil on Kapton® former

• Ferrite motor with neodymium bucking magnet for increased sensitivity

• Parabolic propylene cone

• Nitrile butadiene rubber surround

• Flat progressive Nomex® spider

• Fast-on terminals secured with integrated PC board

• Grilles included

• Hex screws and tools included

SPECS:

• Nominal Impedance: 4 Ohm

• RMS Power Handling: 70 W (with recommended crossover)

• Peak Power Handling: 200 W (with recommended crossover)

• Frequency Response (-3 dB): 90 Hz - 12 kHz

• Sensitivity (2.83 V/1 M): 88 dB

• Recommended Amplifier RMS Power Range: 15 W - 75 W

• Recommended High Pass Filter Frequency and Slope: = 150 Hz, = 12 dB/oct

• Recommended Low Pass Filter Frequency and Slope: = 3.5 kHz, = 12 dB/oct